>> New vision website
>> File Download
>> Contact
>> Brazed PHE
     Brazed PHE Features
     Brazed PHE Models Data
     BL14 / BL14A
     BL20
     BL26
     BL26C
     BL50C/BL50D
     BL95A/BL95B
     BL100
     BL200A/ BL200B
>> Condenser & Evaporator selection
>> Brazed PHE Installation Guide
>> Gasket PHE
     Gasket PHE Features
     Gasket PHE Models Data
     BB60/ M6
     BB100/ M10
     BB150/ M15
     BB200/ M20
     BB250/ MX25B
     BH300/ M30
     BH30/ M3
     BTL10B/ TL10B
     BTS6M TS6M
     BTS20M/ TS20M
>>  Gasket PHE Spares
     Plates & Gasket features
     Gaskets list
     Plates list
>> PHE Application
     Heating Applications
     Solar Heat
     Sanitary PHE
     Cooling Application
     Oil Cooler
>> Air cross plate heat exchanger
Contact Information:
Add: No.33 Xicheng Road JiangYin, China
Post Code:214431
Tel: +86-510-86020253
Fax: +86-510-86020233
Email: info@bd-heatech.com
SKYPE: Johnqi77
MSN: guodongqi119@hotmail.com

 

Baode Gasket Plate Heat Exchanger BH150

BH150/BB150



 

Model

Width

Height

Connection

Max No. of plates

Max flow rate (m3/h)

BH150 (M15B / M15M)

610

1815

DN150

600

360

Detailed Product Description
 

Energy Efficient Gasket Frame and Plate Heat Exchanger  80 kg/s (1300 gpm)

Applications
General heating and cooling duties. Heating by means of steam.

Standard design
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interpolate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program.
The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column.
Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.

Typical capacities
Liquid flow rate
Up to 80 kg/s (1300 gpm), depending on media, permitted
Pressure drop and temperature program

 
Working principle
Channels are formed between the plates and the corner ports are arranged so that the two media flow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is created for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.

Food industry: Milk pasteurization Milk and beverage pasteurization , Wine tempering, Bottled water treatment , CIP (Cleaning-in-Place) heating , Reverse osmosis water.

Marine application : Central cooling of the main or auxiliary engines or turbines, Lubrication oil cooling, Recooling of circulated water for cooling cylinders, pistons, injection nozzles, Cooling of Baode oil, compressor oil and other lubricants, Preheating of lubrication oil and heavy fuel oil, Preheating of seawater for fresh water production, Heat recovery, Heat exchange to air-condition the passengers¨ cabins and freight spaces

Others: 
turbine oil cooler, Chemical industry, district heating, district cooling, swimming pool heating, solar heating,

 

copy right@ Baode Heat Exchanger Co.,Ltd. 2009