|
Detailed Product
Description
¡¡
Energy Efficient Gasket Frame and Plate
Heat Exchanger 300kw - 800 kW 16 kg/s (250 gpm)
Applications
General heating and cooling duties. Heating
by means of steam.
Standard design
The plate heat exchanger consists of a pack
of corrugated metal plates with portholes for the
passage of the two fluids between which heat
transfer will take place. The plate pack is
assembled between a fix frame plate and a movable
pressure plate and compressed by tightening bolts.
The plates are fitted with a gasket which seals the
interpolate channel and directs the fluids into
alternate channels. The number of plates is
determined by the flow rate, physical properties of
the fluids, pressure drop and temperature program.
The plate corrugations promote fluid turbulence and
support the plates against differential pressure.
The frame plate and the pressure plate are suspended
from an upper carrying bar and located by a lower
guiding bar, both of which are fixed to a support
column.
Connections are located in the frame plate or, if
either or both fluids make more than a single pass
within the unit, in the frame and pressure plates.
Typical capacities
Liquid flow rate
Up to 16 kg/s (250 gpm), depending on media,
permitted
Pressure drop and temperature program.
Water heating by steam
300 to 800 kW
Working principle
Channels are formed between the plates and
the corner ports are arranged so that the two media
flow through alternate channels.The heat is
transferred through the plate between the channels,
and complete counter-current flow is created for
highest possible efficiency. The corrugation of the
plates provides the passage between the plates,
supports each plate against the adjacent one and
enhances the turbulence, resulting in efficient heat
transfer.
Food industry: Milk pasteurization
Milk and beverage pasteurization , Wine tempering,
Bottled water treatment , CIP (Cleaning-in-Place)
heating , Reverse osmosis water.
Marine application : Central
cooling of the main or auxiliary engines or
turbines, Lubrication oil cooling, Recooling of
circulated water for cooling cylinders, pistons,
injection nozzles, Cooling of Baode oil, compressor
oil and other lubricants, Preheating of lubrication
oil and heavy fuel oil, Preheating of seawater for
fresh water production, Heat recovery, Heat exchange
to air-condition the passengers¡¯ cabins and freight
spaces
Others: turbine oil cooler, Chemical
industry, district heating, district cooling,
swimming pool heating, solar heating,
¡¡ |
