>> New vision website
>> File Download
>> Contact
>> Brazed PHE
     Brazed PHE Features
     Brazed PHE Models Data
     BL14 / BL14A
     BL20
     BL26
     BL26C
     BL50C/BL50D
     BL95A/BL95B
     BL100
     BL200A/ BL200B
>> Condenser & Evaporator selection
>> Brazed PHE Installation Guide
>> Gasket PHE
     Gasket PHE Features
     Gasket PHE Models Data
     BB60/ M6
     BB100/ M10
     BB150/ M15
     BB200/ M20
     BB250/ MX25B
     BH300/ M30
     BH30/ M3
     BTL10B/ TL10B
     BTS6M TS6M
     BTS20M/ TS20M
>>  Gasket PHE Spares
     Plates & Gasket features
     Gaskets list
     Plates list
>> PHE Application
     Heating Applications
     Solar Heat
     Sanitary PHE
     Cooling Application
     Oil Cooler
>> Air cross plate heat exchanger
Contact Information:
Add: No.33 Xicheng Road JiangYin, China
Post Code:214431
Tel: +86-510-86020253
Fax: +86-510-86020233
Email: info@bd-heatech.com
SKYPE: Johnqi77
MSN: guodongqi119@hotmail.com

Baode Brazed plate heat exchanger BL100
Max Pressure (Mpa) 3
Test Pressure (Mpa) 4.5
Volum Per Channel (L) 0.16
Exchange area (m2) 0.10
Max Tempt (⊥) 225
A 248
B 496
C 157
D 405
E 10+2.15n
Detailed Product Description

Copper Brazed Flat Plate Heat Exchanger Stainless Steel AISI 316 Cover Plates
Working principles
The heating surface consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled.

Standard design
The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer efficiency and to make them rigid.

Standard materials
Cover plates: Stainless steel AISI 316
Connections: Stainless steel AISI 316
Plates: Stainless steel AISI 316
Brazing material: Copper

Particulars required for quotation
To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars:
每 flow rates or heat load required
每 temperature program
每 physical properties of liquids in question
每 desired working pressure
每 maximum permitted pressure drop

Advantages of brazed plate heat exchangers in Industry and HVAC&R
The Baode Brazed plate heat exchangers (BHE) have several advantages over traditional heat exchangers in Industrial and
HVAC&R applications.
每 The high heat transfer efficiency of the BHE makes it extremely compact and also easy to install in places were space is limited.
每 The unit has no gaskets and is therefore suitable in applications were temperature and/or pressure is high e.g. in district heating.
每 The Baode supply system reassures that, no matter were you are on the globe, the BHE units are available with a very short

Refrigeration Systems :

  • Evaporator ,
  • Condenser,
  • Economizers and Desuperheaters
  • Air dryer
  • Heat pump
  • Absorption chiller

HVAC

  • Radiant Floor,
  • Snow Melt,
  • Boiler
  • Solar water heat exchanger
  • District heating

Other Industrial applications such as:

  • Heat Recovery and
  • Oil Cooler: hydraulic oil cooling, engine oil cooling, and fuel oil heating.
  • Steam Heating.
  • Flat plate heat exchanger
  • Beer wort cooler
  • Milk pasteurization
  • Wind turbine oil cooler
  • Marine oil cooler

can replace Alfa laval AC120DQ

copy right@ Baode Heat Exchanger Co.,Ltd. 2009